Renovations can be expensive but worth the investment in the long run. The remodeling process consists of several stages, from planning to execution. Here is a summary of what to expect throughout this process.
Site Preparation
It is necessary to prepare the ground before building a new foundation. Trees and shrubs may need to be removed or relocated, and the landscape contractor can perform this task.
Foundation Excavation, Construction, And Filling
The contractor such as Absolute Home Services for example first cleared the area and dug to a certain depth to prepare the concrete formwork. During this phase, the contractor would take care of any necessary underground electrical wiring or plumbing relocation.
After excavation, the mason or concrete subcontractor such as contractor home repair can place the forms and pour the foundation footings. The foundation footings must be cured for several days before work can begin. After curing the footings and completing all necessary inspections, you can use compacted and sloped materials to fill the foundation voids.
Demolition And Framing
Once the site is ready, demolition of the existing structure can begin. Typically, this work is performed by a contractor with experience in home demolition and removal. The contractor will remove and dispose of all debris from the site properly. After demolishing the house, the structural subcontractor will begin work on the new foundation and structure. Framers will build walls, install roof trusses, and add other structural elements.
Protection Of Property From The Elements
Installing the roofing materials is the first step in waterproofing a project. It will protect the structure and construction of the frame. The second phase of building waterproofing is the installation of windows and doors. Next, you can add the siding and exterior trim.
Interior Partitions
According to the floor plan, carpenters will install stud walls, rough door openings, and other components. By following the plans, carpenters can also ensure that mounting blocks and channels are included in wall sections to help with heating , ventilation, and air conditioning (HVAC ), electrical , and plumbing.
Plumbing, Electrical Wiring, And HVAC Installation
According to the electrical plan, the electrician will install the wiring system in the walls and ceilings. The plumber will also install the rough plumbing once the framing has been completed. The HVAC contractor will then install the ducts in the ceilings and floors.
Isolation
As the energy code specifies, insulation installers will add the necessary insulation to walls, ceilings, and floors.
Drywall Installation
After inspecting all existing fixtures, you can install wall panels and other finishes. Additionally, the contractor will install the tile and ceramic flooring while building the walls.
Flooring installation
Installation of any wood flooring would follow around this time.
Kitchen or bathroom cabinets
Wardrobes and other built-in units are now in use. The installation of the countertop follows the installation of the base cabinets.
Plumbing, Electrical, And HVAC Finishing
The electrical wiring is complete. You will now need to install the power outlets, lighting fixtures, vent registers, and GFI outlets (if necessary). Inspections of all of these surfaces are usually required to move forward.
Paint Or Wallpaper
Once all other tasks are completed, the walls and ceiling can be painted or wallpapered.
Appliance Installation And Gardening
Appliances not installed during construction, such as the oven and dishwasher, are already in place. The landscape contractor will also complete any remaining jobs, such as planting trees and shrubs, installing sod, and paving driveways or walkways.
Certificate of Occupation
Once all inspections are completed, the local building authority issues a Certificate of Occupancy, which indicates that all permit conditions have been met.
Final Tour
A walk-through with the general contractor isn’t just for major construction; It is also an essential step in any large remodeling project.
